Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Saito, Shigeru; Kikuchi, Kenji; Usami, Koji; Ishikawa, Akiyoshi; Nishino, Yasuharu; Kawai, Masayoshi*; Dai, Y.*
Journal of Nuclear Materials, 343(1-3), p.253 - 261, 2005/08
Times Cited Count：9 Percentile：53.1(Materials Science, Multidisciplinary)A beam window of a spallation target will be subjected to proton/neutron irradiation, pressure wave and thermal stresses accompanied by high-energy proton beam injection. To obtain the irradiation data, the SINQ target irradiation program (STIP) was initiated in 1996 at Paul Scherrer Institute (PSI) and has been progressing. JAERI takes part in STIP and shares the PIE work. In this study, the results of tensile tests on austenitic stainless steels, JPCA and 316F SS, will be reported. The results indicate that the irradiation causes considerable hardening and degradation of ductility. The YS increases in this study are slightly large in comparison with those irradiated at fission reactor. Strain-to-necking (STN) values show sufficient large ductility of the irradiated JPCA-SA and 316F-SA. The trends of the STN decrease in this study are slightly abrupt in comparison with those irradiated at fission reactor. All specimens, including irradiated at embrittlement temperature for austenitic steels, fractured in ductile manner.
Saito, Shigeru; Kikuchi, Kenji; Usami, Koji; Ishikawa, Akiyoshi; Nishino, Yasuharu; Kawai, Masayoshi*; Dai, Y.*
Journal of Nuclear Materials, 329-333(Part1), p.1093 - 1097, 2004/08
Times Cited Count：6 Percentile：40.63(Materials Science, Multidisciplinary)In several institutes, research and development for an accelerator-driven spallation neutron source have been progressed. A beam window of a target will be subjected to proton/neutron irradiation, pressure wave and thermal stresses accompanied by high-energy proton beam injection. To obtain the irradiation data, the SINQ target irradiation program (STIP) at Paul Scherrer Institute (PSI) has been progressing. JAERI takes part in STIP and shares the PIE work. The STIP specimens are very small so that we developed a new fatigue-testing machine with ceramic piezoelectric actuator. The results showed that the numbers of cycles to failure (Nf) on the irradiated specimens were less than that of unirradiated specimens. Dpa dependence of Nf was not clearly seen in the irradiation conditions. On the other hand, fracture surface varied with irradiation conditions. Specimens irradiated at low temperature fractured in ductile manner. However, interglanular fractured surface was observed for 316F SS irradiated up to 12.5 dpa at 360
C.
Iga, Kiminori*; Takada, Hiroshi; Ikeda, Yujiro
JAERI-Tech 99-023, 32 Pages, 1999/03
no abstracts in English
